Showing 1–9 of 11 results

  • 8 ZONE EXPANSION MODULE CODE: PA5380

    FEATURES:

    • Compatible with MG Series, SP Series, and E Series
    • Add 8 zones
    • 1 PGM output
    • Use zone input as an anti-tamper switch input
  • HUB2 HUB AND BUS ISOLATOR CODE: PA5363

    FEATURES:

    • Divide the bus into two completely isolated outputs (if one output fails, the other will continue to function)
    • One input port, 2 completely isolated output ports
    • Each output port provides communications up to 900m
  • IP150+ INTERNET MODULE CODE: PA3805S

    FEATURES:

    • Central station reporting via IPR512 or IPRS-7
    • Provides connectivity to Insite GOLD, BabyWare, NEware or InField to access your system through the internet
    • DHCP connectivity with no configuration
    • Remote firmware upgrades with a fail-safe mode
    • Sends notification and alarm system events via email
    • Internal diagnostic logs via Insite GOLD app
    • SSL support for sending secured email messages, via a secure sockets layer; a popular protocol for encrypting information over the internet
    • Easy installation: no screws needed, a built-in clip for mounting in a metal box
  • PCS250 GPRS/GSM COMMUNICATOR MODULE CODE: PA3816S

    FEATURES:

    • Compact, sleek design
    • Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software
    • Report via text message (up to 16 cell phone numbers)
    • Control panel communication supervision
    • End-user can arm or disarm the system by sending a text message (SMS) to the PCS250
    • Send pre-recorded voice messages to up to 8 telephone numbers to report alarms using the optional VDMP3 Paradox Plug-in Voice Module (GSM mode)
    • Simple installation with 4-wire serial connection
    • Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength
    • 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode)
    • Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus). A CVT485 module must be added to the panel in order to accomplish this
    • Report via GSM (CID, SIA)
    • EN 50131 grade 3
  • PGM82 EXPANSION MODULE CODE: PA3803

    FEATURES:

    • Expansion of 8 programmable outputs
    • PGM control via Insite GOLD application
    • PGM control with manual on-box switches
    • Can follow system events
    • Display for each PGM, Data and Power
    • Box cover lock mechanism
    • Supports SP, MG, EVO and Swan
    • Connects to control panel via 4-wire on keypad bus
    • Firmware upgradeable
  • PS17 DIGIPLEX POWER SUPPLY MODULE CODE: PA3462

    • 1.7A switching power supply
    • Fully supervised (AC, battery, low battery and auxiliary limit)
    • Selectable battery charge current (350mA/850mA)
    • 1 PGM output
    • Includes 20cm x 25.5cm x 7.6cm metal box
  • RPT1 WIRELESS REPEATER MODULE CODE: PA3804

    FEATURES:

    • Built-in transceiver (433MHz or 868MHz)
    • Allows to extend the range of wireless communications
    • Supports all MAGELLAN transmitters
    • Select which zone, PGM and/or keypad signals are repeated
    • Signal strength display
    • 1 programmable 5A relay output
    • Universal transmitter input (N.O./N.C.)
    • In-field firmware upgrade via 307USB and WinLoad
    • Wireless range in a typical residential environment:
      – 75m (240ft) with 433MHz;
      – 50m (160ft) with 868MHz
    • Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel.
    • AC input (16Vac, 20VA)
    • Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6c
  • RTX3 WIRELESS EXPANSION MODULE – REM2 CODE: PA3809

    FEATURES:

    • Compatible with Spectra SP Series and Digiplex EVO
    • 32 wireless zones
    • Maximum number of remote controls: 32
    • Remote control compatibility
    • SP: REM1, REM2, REM3
    • Stand Alone: REM1
    • Wireless PGMs (16 w/SP)
    • Supports two RPT1 and eight K32LRF / K32IRF (Spectra SP only)
    • In-field firmware upgradeable via CV4USB and Winload
    • RF jamming supervision
    • Low battery, tamper and check-in supervision
    • Transmitter signal strength display
    • 3 PGM outputs and 1 optional output
    • Noise level test and indicator
  • SR130 WIRELESS OUTDOOR SIREN WITH BUILT-IN STROBE LIGHT CODE: PA3814

    The SR130 is a weatherproof (IP54) and fully supervised wireless siren with a built-in strobe light. SR130 provides fast response to alarm signals with differentiation between intrusion and fire events.