ZX8 8 ZONE EXPANSION MODULE CODE: PA3558
In Stock
FEATURES:
- Compatible with MG Series, SP Series and Digiplex EVO
- Add 8 zones
- Selectable input resistors for EOL and Tamper
- 1 PGM output
- Use zone input as an anti-tamper switch input
- Support selectable EOL with V6.0
Related products
-
8 ZONE EXPANSION MODULE CODE: PA5380
FEATURES:
- Compatible with MG Series, SP Series, and E Series
- Add 8 zones
- 1 PGM output
- Use zone input as an anti-tamper switch input
-
RPT1 WIRELESS REPEATER MODULE CODE: PA3804
FEATURES:
- Built-in transceiver (433MHz or 868MHz)
- Allows to extend the range of wireless communications
- Supports all MAGELLAN transmitters
- Select which zone, PGM and/or keypad signals are repeated
- Signal strength display
- 1 programmable 5A relay output
- Universal transmitter input (N.O./N.C.)
- In-field firmware upgrade via 307USB and WinLoad
- Wireless range in a typical residential environment:
– 75m (240ft) with 433MHz;
– 50m (160ft) with 868MHz - Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel.
- AC input (16Vac, 20VA)
- Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6c
-
PCS250 GPRS/GSM COMMUNICATOR MODULE CODE: PA3816S
FEATURES:
- Compact, sleek design
- Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software
- Report via text message (up to 16 cell phone numbers)
- Control panel communication supervision
- End-user can arm or disarm the system by sending a text message (SMS) to the PCS250
- Send pre-recorded voice messages to up to 8 telephone numbers to report alarms using the optional VDMP3 Paradox Plug-in Voice Module (GSM mode)
- Simple installation with 4-wire serial connection
- Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength
- 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode)
- Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus). A CVT485 module must be added to the panel in order to accomplish this
- Report via GSM (CID, SIA)
- EN 50131 grade 3
-
PS17 DIGIPLEX POWER SUPPLY MODULE CODE: PA3462
- 1.7A switching power supply
- Fully supervised (AC, battery, low battery and auxiliary limit)
- Selectable battery charge current (350mA/850mA)
- 1 PGM output
- Includes 20cm x 25.5cm x 7.6cm metal box